Mountings

Standard Body

Fibre-optic Models

There is a range of optional mountings available to ensure you get the best possible service from the investment you have made when specifying SPOT pyrometers for your application solution.

For full details of all mountings please view datasheet.

Standard Body

  • Mounting Bracket

    Mounting Bracket

    PART Number 808468

    The Mounting Bracket forms the basis of the Light Purge, but can be used on its own where there is no requirement for a purge air supply to keep the thermometer lens clean. It is straightforward to install, and has a hole for mounting on a tripod. It can also be fitted to ball mount allowing 360° rotation for precision alignment.

  • SPOT Water Cooled Mounting

    SPOT Water Cooled Mounting

    PART Number 808100

    This incorporates the integrated Protection Jacket and Purge plus the hinged back cap. Recommended for use with a Pan & Tilt Bracket (806761).

  • Small Pan & Tilt Bracket

    Small Pan & Tilt Bracket

    PART Number 806761

    An adjustable bracket to allow precise alignment of a SPOT instrument.

  • Sealed to Process Water Cooled Mounting

    Sealed to Process Water Cooled Mounting

    PART Number 808862

    A sealed to Process solution, allowing the thermometer to be removed from the housing without process interference. Recommended for use with the Pan & Tilt Bracket (806761).

  • Light purge

    Light Purge

    PART Number 808015

    The Light Purge is designed to keep the thermometer lens clean, when installed in less-hostile environments such as measurements made on low temperature, cleaner applications. The air flow for the purge is 140 litres/minute. They are simple to assemble and can be mounted using the various diameter holes in the mounting bracket (see Mounting Bracket). Comes complete with bracket and lock nut.

  • System 4 to SPOT Adaptor Kit

    System 4 to SPOT Adaptor Kit

    PART Number 808018

    The System 4 to SPOT Adapter Kit allows you to install a Land SPOT Thermometer in a System 4 Water-Cooled Jacket.

    This means that you can replace an existing System 4 Thermometer with a Land SPOT thermometer without having to replace any existing thermometer protection jackets or mountings.

    The System 4 to SPOT Adapter Kit comprises an Adapter Frame, a Lock Ring and a Replacement Cable Assembly.

Fibre-optic Models

  • 029.870

    Adaptor and Air Purge

    PART Number 029.870

    The air purge is used where a clear sight path has to be maintained, by using the purging air to maintain the lens free from dust, dirt etc. The purge connects to the optic head with a quick-release adapter (supplied) which allows rapid, no tools removal of the optic head for routine maintenance. The purge is secured on the installation using either a mounting adapter or plate (see below).

    Air purge flow rate: 60 litre/min, Air purge pressure: 0.1 Atmosphere (0.1bar)

  • Adapter, Air Purge & Adjustable Mounting Flange

    Adapter, Air Purge & Adjustable Mounting Flange

    PART Number 029.871

    The adapter, air purge and adjustable mounting flange assembly attaches to the optic head, and provides a mounting using the four holes through the circular plate. Three studs link the main plate to a smaller plate which provide adjustment to ensure accurate alignment on to the target surface; particularly useful when sighting onto a small target. The quick-release adapter which forms an integral part of this assembly allows rapid, no tools removal of the optic head for routine maintenance.

    Air purge flow rate: 60 litre/min, Air purge pressure: 0.1 Atmosphere (0.1bar)

  • Adapter, Air Purge & Mounting plate

    Adapter, Air Purge & Mounting plate

    PART Number 029.872

    The adapter, air purge and mounting plate assembly attaches to the optic head, and provides a mounting using the four holes through the circular plate. The quick-release adapter which forms an integral part of this assembly allows rapid, no tools removal of the optic head for routine maintenance.

    Air purge flow rate: 60 litre/min, Air purge pressure: 0.1 Atmosphere (0.1bar)

  • Small, threaded hole optic head bracket

    Small, threaded hole optic head bracket

    PART Number 029.238

    The Fibroptic Adapter enables the optic head to be mounted as a stand-alone, in applications which require no purging, protection or special mounting considerations. A single 1/4in thread bolt hole can attach to the Small Ball Mounting or a standard tripod mounting. Two further holes in the base permit mounting to a flat surface.

  • Adapter, Air Purge & Mounting Bracket

    Adapter, Air Purge & Mounting Bracket

    PART Number 029.873

    The adapter, air purge and mounting bracket assembly attaches to the optic head, and provides mounting using the single hole in the base of the bracket. Alternatively, the bracket will attach to the large ball-mounting to provide adjustment to ensure accurate alignment on to the target surface; particularly useful when sighting onto a small target. The quick-release adapter which forms an integral part of this assembly allows rapid, no tools removal of the optic head for routine maintenance. 

    Air purge flow rate: 60 litre/min

    Air purge pressure: 0.1 Atmosphere (0.1bar)